Dali Phantom E-60 S In-Ceiling Speaker is the first build-in stereo speaker by DALI, featuring two 20 mm tweeters. Its compact size makes it perfect for small to medium-sized rooms or as height speakers in a multi-channel setup.
TRADITIONAL SPEAKER TECHNOLOGIES
The high-end PHANTOM install speakers are packed with traditional speaker virtues. Not only are the wood fiber cones and ultra-lightweight soft dome tweeters mounted in a classic MDF baffle, the placement of the drivers is just similar to our traditional speakers.
WIDE DISPERSION
All speakers by DALI are designed around the principle of wide dispersion. This entails an off-axis optimisation of the audio reproduction. The technology is perfect for use in install speakers, since they are always mounted flush against either a wall or ceiling.
INVISIBLE DESIGN
The very thin magnetic front grilles integrate almost seamlessly into any home environment.
EASY INSTALLATION
The dogleg mounting system makes the install process an easy one-step action simply by tightening the dedicated screws to swing out the dogleg brackets.
PRODUCT DETAILS
The new PHANTOM E-60 S stereo speaker builds on the heritage of the highly acclaimed DALI PHANTOM E-60 in-ceiling speaker – featuring two 20 mm soft dome textile tweeters.
With a distance of 144 mm between the tweeters, you will experience a wider-than-average perspective from this true stereo speaker. The signal path is a dual mono construction with separate inputs and crossover PCB’s for each channel. Two switches ensure that both channels can be tuned for the acoustics of your listening room, resulting in fantastic integration and a high level of details.
Typical use will be for stereo in small to medium-sized rooms. It is also possible to apply the PHANTOM E-60 S as height speaker(s) in a multi-channel setup.
The PHANTOM E series
The DALI PHANTOM E-60 S is designed for optimum in-ceiling use, but will also work if mounted in-wall. It is all about true hi-fi sound, versatility, and flexibility.
box
The PHANTOM E-60 S can also be combined with the optional, well-known DALI backbox, which protects the speaker against moisture, dust and dirt. It keeps the sound quality consistent (symmetrical loading), even if the acoustic environment behind the walls/ceiling is uneven. With the backbox, you avoid rear sound radiation, reducing acoustic leakage from room to room and from floor to floor. The DALI backbox is not included with the PHANTOM E-60 S, but can be chosen as an optional accessory.
DESIGN
The dogleg mounting system makes the install process an easy one-step action. Simply insert the PHANTOM E-60 S in the prepared mounting area, and from the front of the speaker tighten the dedicated screws to swing out the dogleg brackets and tighten them against the back of the mounting surface. If the mounting surface is extra thick, reversing the dogleg makes it possible to expand the mounting grip to 70mm.
TWEETER
The two 20 mm ultra-lightweight soft dome tweeters coupled with the well known PHANTOM E polypropylene woofer – here equipped with a dual voice coil – ensure a compact, yet high quality, two-way, two-channel performance.
WOOFER
The woofer is tilted and angled for improved directionality and sound staging. The cone, surround and magnet motor system is designed according to the DALI low-loss principles. This makes the PHANTOM E-60 S an easy speaker to drive, and even smaller amplifiers will be able to deliver a high quality audio experience with the PHANTOM E-60 S.
DALI PHANTOM E-60 S SPECS
PRODUCT SERIES |
PHANTOM |
Frequency Range (+/-3 dB) [Hz] |
57 – 25,000 |
Sensitivity (2,83 V/1 m) [dB] |
90.0 |
Nominal Impedance [ohms] |
2 x 8 |
Maximum SPL [dB] |
105 |
Recommended Amplifier Power [W] |
2 x 20-80 |
Crossover Frequency [Hz] |
2,600 |
High frequency driver, Quantity |
2 x 20 mm |
High frequency driver, Diaphragm type |
Soft Textile Dome |
Low frequency driver, Quantity |
1 x 6½” |
Low frequency driver, Diaphragm type |
Polypropylene Cone (Dual voice-coil) |
Enclosure type |
Open back |
Connection Input |
2 x Single Wire |
Recommended Placement |
In-Ceiling |
Functions |
2 x Normal/HF+ |
Dimensions (ØxD) [mm] |
250 x 99.5 |
Cut-Out Dimensions (ØxD) [mm] |
Ø225 |
Accessories Included |
Cut-Out Template Front Grille Logo Badge Manual |
Optional Accessories |
Square G |